Air Sense 10 AutoSet
The ResMed AirSense™ 10 AutoSet CPAP Machine with HumidAir™ Heated Humidifier combines the proven technology of the AutoSet algorithm with the integrated comfort of the Optional ClimateLineAir Heated Tube. This is an auto titrating CPAP machine which adjusts the pressure on a breath by breath basis to deliver the minimal pressure needed to maintain the airway.
ResMed’s advanced algorithm is proven to provide effective therapy on a breath by breath basis accounting for flow limitations. Pressure is smoothly increased over the duration of the limitation and decreases again when the event clears. This is beneficial for active sleepers who experience a great number of events when changing position during sleep. AutoSet Response is also available to make pressure increases even more tolerable and gentle. The AirSense™ 10 AutoSet can be set to automatically adjust or to a single pressure mode if desired.
HumidAir™ Heated Humidifier and Optional ClimateLineAir™ Heated Tube
The Humidair™ humidifier is built into the AirSense™ 10 machine making for a smaller overall footprint on the bedside table. Humidity level is easily adjustable from the My Options screen and offers 9 setting levels. Select 1 through 8 with 1 being the lowest level of humidification, and 8 being the highest, or turn the humidifier off entirely.
Add the OPTIONAL ClimateLineAir™ Heated Tube to optimize humidification with Climate Control’s Auto function. The system considers the temperature of the room air to provide optimum humidification with minimal rainout condensation.
Expiratory Pressure Relief (EPR™)
ResMed machines offer EPR™ making breathing with a CPAP device more natural by adjusting the amount of pressure delivered during exhalation and inhalation. EPR can be turned off, or set to 1, 2 or 3 with 1 being the smallest change between inhalation and exhalation and 3 being the largest change in pressures.
LCD Display with My Options
The AirSense 10 AutoSet has a colored LCD display and easy to read menus. Select the menu item on the screen by turning the easy grip dial. Selecting the My Options menu shows the current settings and lets the user modify settings including:
- Ramp time – Ease into therapy with a period of lower pressure. Or select AutoRamp™ and the machine senses when sleep begins.
- Humidity Level – Set humidity between 1 (lowest) & 8 (highest), or turn it off.
- Mask Fit – Runs a seal integrity check showing green smiling face or red frowning face.
- Pressure Relief – Eases the pressure when exhaling
- SmartStart™ – Therapy automatically starts when it senses breathing
- Mask Type – Set mask type being used: Nasal; Nasal Pillow; Full Face Mask
- Run Warmup – Preheat the humidifier water before starting therapy
- Response – Provides a more gentle transition during pressure increases
An integrated light sensor reads the light in the room and adjusts the screen brightness automatically. When the lights in the room are turned off, the screen dims and then, after a few seconds, goes dark. No bright display screen to disturb sleep.
The AirSense™ 10 AutoSet will display the following advanced therapy data on the machine display through the “More Info” option in the “Sleep Report” menu:
- Usage Data
- Events Per Hour
- Average Usage
- Leak Rate
Return On Warranty Issues Only
This Product Includes…
- Auto-Adjusting CPAP Machine
- Built-In HumidAire Heated Humidifier
- Standard Humidifier Chamber
- SlimLine Tubing – 15mm Diameter
- Power Supply and Cord
- Travel Bag
- 1- Standard Filter (Installed)
- Filter Cover
- SD Card – Inserted in Machine
- Patient Manual
Weight – Machine with Water Chamber: 2.75 lbs (44 oz.)
Dimensions – Machine with Water Chamber: 10.04 in L x 4.57 in W x 5.91 in H
Weight – Standard Chamber: .54 lb
Weight – Machine with Side Cover (Without Water Chamber): Approx. 2.452 lbs
Dimensions – Machine with Side Cover (Without Water Chamber): Approx. 8 in L x 4.57 in W x 5.91 in H
Dimensions – Travel Bag: 13.24 in L x 10 in W x 5 in H
Weight – Travel Bag Alone: 1.18 lb
Weight – Machine with Humidifier; Power Supply and Cord; SlimLine Tube; Travel Bag: Approximately 5.1 lbs
Weight – Machine with Humidifier; Power Supply and Cord; OPTIONAL ClimateLineAir Tube; Travel Bag: Approximately 5.25 lbs
Sound Level: 26.6 dBA
Water Chamber Capacity: 380 mL
Weight – 90W Power Supply, Cord and Plug: 1.29 lb
Dimensions – 90W Power Supply Only (Not including Cord or Plug): 5 1/2 in x 1 7/8 in x 1 1/4 in
AC Input Range – 90W Power Supply: 100 – 240V, 50 – 60Hz, 1.0 – 1.5A, Class II
DC Output – 90 W Power Supply: 24V — 3.75A
Typical Power Consumption: 53W (57VA)
Peak Power Consumption: 104W (108VA)
Operating Pressure: 4 – 20 cm H2O (0.2 cm increments)
Length – SlimLine Tubing: 6 feet
Materials – SlimLine Tubing: Flexible Plastic
Materials – Water Chamber: Injection Molded Plastic, Stainless Steel, Silicone Seal
Materials – Standard Filter: Polyester non-woven fiber
Temperature Range – Optional ClimateLineAir™ Heated Tube: 60 – 80° F (16 – 30° C)
Operating Temperature: 41° F – 95° F (5° C – 35° C)
Storage and Transport Temperature: -4° F – 140° F (-20° C – 60° C)
Operating Humidity: 10% – 95% Relative Humidity, non-condensing
Storage and Transport Humidity: 5% – 95% relative Humidity, non-condensing
Operating Altitude: Sea Level – 8500 Feet (2,591 M); Air pressure range 1013 hPa – 738 hPa
Maximum Temperature – Heating Plate: 154° F (68° C)
Maximum Temperature – Cut Out: 165° F (74° C)
Maximum Gas Temperature: Less than or Equal to 106° F (? 41° C)
IEC 60601-1:2005 Classification: Class II (Double Insulation), Type BF, Ingress protection IP22
Machine Warranty: 2 Years
Patient Weight: Greater than 66 lbs
The chamber should be taken apart and hand washed weekly using warm water and a mild detergent. It should be rinsed well and allowed to air dry out of direct sunlight before reassembling. The chamber should not be washed in a dishwasher or washing machine. The SlimLine hose should be washed in the same manner and allowed to completely dry out of direct sunlight before reattaching to the machine and mask.
Required Settings: This machine does not have required settings.
Unless directed otherwise, CPAP.com will leave this machine at its default settings of:
- Mode: AutoSet
- Minimum Pressure: 4 cm H2O
- Maximum Pressure: 20 cm H2O
- Ramp: Auto
- Start Pressure: 4 cm H2O
- Humidity Level: 4
- Mask Type: Pillows
- EPR: Off
- SmartStart: Off
- Tube Type: Slimline
- Antibacterial Filter: No
purchase valtrex canada